• Install the cup dispenser

      • Welcome

        This instruction will show you how to install the Animo cup dispenser.

        The cup dispenser is equipped with a self-adjusting gasket to dispensing cups in various sizes. The use of a cup dispenser is very hygienic, the user only has contact with his own cup. In addition, the cup dispenser saves space and is suitable for mounting on the wall. A perfect solution in combination with an Animo coffee machine or water dispenser.

        Original instructions - published 07-2020

      • Check the contents of the package:

        • Cup dispenser
        • Mounting material (2x)
        • User manual

        This manual belongs to the following cup dispensers:

        • 1009772: adjustable from 58 - 80 mm.
        • 1009773: adjustable from 70 - 98 mm.

      • Mount the suspension plates one above the other on the wall. Intermediate distance center to center 32.5 cm.

      • Turn the screw to loosen them slightly.

        1. Hold a cup in the dispenser hole
        2. Rotate the ring to fit the opening tabs to the cup.
        1. Fasten the ring with its screw to the chosen position.
        2. Test that you can easily pull out a cup. If not, repeat the previous steps.
      • Place the dispenser in the mounting plates on the wall.

      • The cup dinspenser is now ready to use.

    • Commissioning

      • Remove the lid from the dispenser.

      • Place cups in the dispenser.

      • Place the lid on the cup dispenser.

      • You can now easily pull cups out of the cup dispenser.