• Install the High Feet

      • Welcome

        This instruction will show you how to add high feet under the OptiMe coffee machine and add-ons (Milk Cooler, Cup warmer, etc.).

        Before you start, carefully read the " Safety instructions and environmental information" provided with the machine.

        Original instructions - published 07-2020

      • Unpack the package and check the contents:

        • High feet, 100 mm. (4x)
        • 4 x threaded end
        • 4 rings (only supplied with High feed for add ons, art. no. 1008145)
        • Drip tray support (only supplied with High feed for OptiMe machine, art.nr. 1008144)
        • Manual

      • Unplug the OptiMe from the mains socket.

      • Remove the drip tray

      • Insert the threads halfway into the feet

      • 1. Tilt the OptiMe backward.

        Attention: Do not tilt the OptiMe sidewards.

        2. Remove the 2 front feet.

        3. Tilt the OptiMe forward

        4. Remove the 2 back feet

      • Insert the new feet under the machine.

      • Remove the bolts with plastic cylinder from the inner front side of the machine.

        1. Place the drip tray support in the machine.
        2. Fix the support with the cylinder and bolts on both sides.

        1. Place the drip tray in the machine.
        2. Connect the machine to the mains socket.
      • The machine is ready for use.

        The next steps show how to add high feet to an add on.

      • When adding high feet under an add on (Milk cooler, Cup warmer, Payment system, etc.):

        Place an extra ring on the feet.

      • Insert the feet with the ring on the add-on.

      • The machine and add on are ready for use.