• Install the Cup warmer (original instructions)

      • Welcome

        With the professional OptiMe cup warmer of Animo you can pre-heat your cups. This keeps the coffee at the perfect taste and temperature longer.

        This instruction will show you how to install the Animo Cup warmer.

        Original instructions - published 05-2020

        Before you start

        Carefully read the " Safety instructions and environmental information" provided with the machine.

        Intended use of the appliance

        Animo appliances are exclusively designed for producing hot drinks. Accompanying accessories such as milk coolers and cup warmers are intended to be used adjacent to the appliances. All Animo appliances are intended to be installed and used indoors. All appliances are intended to be used in households and similar applications such as:

        • Staff kitchen areas in shops, offices and other working environments
        • Farm houses
        • By clients in hotels, motels and other residential type environments
        • Bed and breakfast type environments
        • Catering and similar non-retail applications 

        All appliances must be installed, used and maintained as described in the accompanying manuals. Only use the appliance if it is in a perfect mechanical condition and only for the purpose for which it is intended.

        SAFETY

        • Before use, check the Animo appliances for completeness and damage. Damage must be repaired by Animo, Its dealer or other qualified professionals.
        • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved
        • Children shall not play with the appliance
        • Cleaning and user maintenance shall not be made by children without supervision
        • All users have to understand the hazards involved in using this appliance.
        • Parts of the appliance may become very hot during use. Do not touch these parts.
      • TECHNICAL DATA

        The OptiMe Cup warmer is designed for preheating coffee cups and glasses used with the Animo OptiMe coffee machine .

        • External dimensions: 230 (W) x 420 (D) x 455 (H) mm.
        • Use at elevation above sea level: < 2,000 M
        • Noise emission < 70 dB
        • Weight: 11 Kg.
        • Ambient conditions: humidity max. 80%, ambient temperature: 10 - 32°C (50-90°F).
      • Check the contents of the package:

        • Cup warmer
        • Power cable
        • Safety instructions and environmental information (art.no. 1008444)
        • User manual
      • Remove the protective foil.

      • Place the cup warmer on a flat surface

      • Connect the cup warmer to a 230 V mains power source with the provided power cable. 

        Your Cup warmer is now installed and ready to use.

        Attention: Make sure that the power cable does not come into contact with the cup warming tray which becomes very hot when in use.

      • Optionally: use magnets (accessory , Art. No. 1008139) to attach the cup warmer to the Animo OptiMe coffee machine.

        1. Switch on the trays with the front switches.
        2. Place dry cups upside down on the trays.

        The shelf will begin heating, and it will reach its steady-state temperature after abt. 60 minutes.

    • Cup warmer daily cleaning

      • Switch off the Cup warmer before cleaning and allow to cool.

      • Empty the Cup warmer

      • Clean the inside and outside of the cup warmer with a damp cloth.

        Attention! Do not use abrasive products.

      • Place the cups back into the Cup warmer and switch the Cup warmer on.

        The shelf will begin heating, and it will reach its steady-state temperature after abt. 60 minutes.