Welcome
This instruction will show you how to install a water reservoir for the OptiMe coffee machine.
Before you start, carefully read the " Safety instructions and environmental information" provided with the machine.
Check the contents of the package:
Unplug the OptiMe from the mains socket
Remove the screws of the back cover.
Remove the back cover.
Remove the cover plate for the power cable feed-through.
2. Remove the red and purple wire connectors from the power pins.
Connect the internal power cord (from the package) to the plugs that you just removed from their pins.
Attention! Make sure to connect cables with matching color: Red cable to the red, and purple to the purple cable.
Place the coupled plugs back on the power pins.
Note: the position of the pins (left-right) is not important.
Insert the water hose in the connector.
Note: the actual position of the opening on the back of the tank housing may vary.
Connect the OptiMe and the water reservoir with the external power cable.
Optionally: use magnets (accessory , Art. No. 1008139) to attach the water reservoir to the coffee machine.
Connect the OptiMe to the mains socket.
Optionally: for a clean desk you can use an ingredient box (Art. no. 1007229) on top of the OptiMe water reservoir.
Your water reservoir is now installed.
Welcome
This instruction will show you how use a watertank with the OptiMe coffee machine.
Make sure the Water reservoir is clean before every refill.
The reservoir is dishwasher safe (max. 50 °C).
Attention! Clean the lid by hand. Do not wash it in the dishwasher.
Wash your hands thoroughly before you start.
Place the filter in the water reservoir.
Benefits of using a water filter are:
Fill the container with water.
The container capacity is 8,2 liter total, with 5,2 liter filtered water.
Close the lid.
Place the filled water container in the housing and push it well to the back wall.
Optionally: Place spare water filters (accessory, Art. no. 1009023, set of 6 Brita Maxtra+ filter cartridge) in the housing beneath the container.
On the OptiMe touchscreen: Select the machine menu ☰
Select OPERATOR MENU.
Type the PIN-CODE to enter the operator menu.
Choose SERVICE MENU (1.07).
Type the PIN-CODE to enter the service menu.
Change Setting:
Your water reservoir is now ready to use.